Pig farm screw feed system equipment
The feeding amount of the twisting dragon line is not easy to be too much to the hopper each time. The feeding amount is appropriate to bury one-third of the hopper. There are foreign bodies in the feed, such as plastic bags, branches, wires and other foreign bodies, so as to avoid the motor stuck. Pay attention to stability in the process of twisting dragon material line, do not extend the hand into the hopper suction mouth, spiral pig feed line PP material three, so as not to be twisted into the machine. If the material line is abnormal, cut off the motor power immediately. After troubleshooting, the power can be energized.
Product specification
Model |
Pipe diameter |
Transporting ability |
Maximum pellet size/feed type |
Model 55 |
2~1/4’’ (55mm) |
15Ib/min. (7kg/min). |
1/8’’ *1/2’’ 3mm*13mm Maximum humidity 18% |
Model 75 |
3’’ (75mm) |
50Ib/min. (22kg/min). |
1/8’’ *1/2’’ 3mm*13mm Maximum humidity 18% |
Model 90 |
3~1/2’’ (90mm) |
100Ib/min. (45kg/min). |
3/16’’ *1/2’’ 5mm*13mm Maximum humidity 18% |
Model HMC |
3~1/2’’ (90mm) |
50Ib/min. (22kg/min). |
3/8’’ *3/4’’ 10mm*20mm High humidity feed (less than 27%) |
Model | The system length | ||
The motor power | Maximum system length | Maximum length of extension | |
Model 55 | 1/3 | 150’(46m) | 185’(56m) |
1/2 | 250’(76m) | 285’(86m) | |
Model 75 | 1/2 | 80’(24m) | 125’(38m) |
3/4 | 150’(46m) | 185’(56m) | |
1 | 200’(61m) | 245’(75m) | |
Model 90 | 1/2 | 30’(9m) | 65’(20m) |
3/4 | 90’(27) | 125’(38m) | |
1 | 150’(46m) | 185’(56m) | |
Model HMC | 1/2 | 30’(9m) | 55’(17m) |
3/4 | 90’(27m) | 105’(32m) | |
1 | 150’(46m) | 185’(56m) |