Custom pig farm stainless steel traction scraper manure removal equipment
Installation diagram
1. The main engine and the corner wheel are fixed in their respective positions according to the layout plan, and then the scraper is put into both ends of the fecal canal one front and one back. Spread out the flax string.
(as shown in Figure 1), the rope at point B should be placed about 10-15 meters more (for the rope of the host disk). Fix point A and scraper 1 with the rope clip.
2. According to Figure 2, find a strong short rope/steel wire (A rope) to connect the corner wheel armor with scraper A and fix it firmly (the short rope should be fixed on the supporting shaft of the corner wheel and the beam of scraper A)
3. As shown in FIG. 3, wrap the excess rope at point B around the two rope wheels of the main engine, then hang all the rope on the corner wheel (do not let the rope fall down), and then pull the rope tight by human. The main engine is connected to the power supply, find someone to hold the rope at point B and pull it tight, and then start the main engine. The main engine rotates in the direction of point B and starts to tighten the rope
4. Connect and fix the rope head of point B with the other end of scraper 1 with a rope card (as shown in Figure 4), then remove the rope of A, and finally the scraper 2 is fixed together with the rope, and the rope is tightened.