Direct selling chicken farm livestock farm feed barn

Short Description:

The top of the feeding tower is provided with a loading port, and the bottom is provided with a rectangular discharge groove. The feed in the tower is transported to the feed box of the feeding machine in the house through the feeding machine. In order to prevent feed in the tower overhead arch, generally at the bottom of the tower is equipped with a vibrator or in the cone is equipped with a broken arch device.


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    Product Tags

    44

           The material of the tower is made of hot galvanized steel plate, double-sided galvanized layer 275G /m2, and the passivation out of the reason, greatly enhance the anti-rust performance, improve anti-corrosion ability. All bolts of the feed tower are made of alloy high-strength hot-dip galvanized bolts,48 hours salt spray test; The horizontal seam and vertical seam of the plate are sealed with sealant, with wind and rain proof, firm and long service life.
          The material tower cover adopts automatic elastic torsion spring control structure, and the handle can open and close the material tower cover freely on the ground. The lower cone is equipped with an organic transparent glass observation window to facilitate timely observation of material delivery.
           Each step of the material tower ladder is solid and non-slip, and is equipped with circular guardrail, which makes the design safer and more humanized.
            The tower has a variety of tonnage (2-30T) to choose from.

    66
    65

    Towers material and design abstract:
    1. Gym, brace, support are all made of hot galvanized steel sheet folding processing, shougang 275 grams of gb material not rust;
    2. The ladder is 275 grams of galvanized steel sheet folding processing, then use galvanized screws fixed hard links, ladder and the towers are link hole accurately;
    3.  Hole error less than 1 mm, all hole can be directly to, install fast;
    4. The circular arc is used to design and the tower under the cone of the mouth can close connected, not leak powder;
    5. Cone designed on towers, taper hole on a drive under the fold side, not glue can't ooze water;
    6. Small towers to the guardrail, bar link all of 275 hot galvanizing plate general;
    7. If useful to weighing, weighing machine for wide digital measurement sensor, using a single sensor wire cutting steel link reliable fixed to the ground, a single sensor product weight more than 17 kilograms after assembly;
    8. The tower of the tower is the word wave design, the same piece of steel plate wave, intensity will be bigger, load will be more stable. Verify the capacity is based on the actual capacity of towers.

    Welcome to Discuss these Issues with us! 

    Facebook

    WhatsApp

    Line

    Zalo


  • Previous:
  • Next:

  • Write your message here and send it to us