Manufacturer Direct Selling Poultry House Silo Custom Feed Silo
The storage tower generally has a small diameter and a high body. When the feed water content exceeds 13% and the storage time exceeds 2 days, the feed in the storage tower will appear "arch" phenomenon, which makes the feed overhead and not easy to be discharged. Therefore, he needs to install a broken arch device. The storage tower is mostly used for large mechanized chicken farm. The storage tower uses bulk feed truck to load material from the top of the tower. When feeding, the feeder will send the feed to the feeder in the chicken house, and then the feeder will send the feed to the trough for the chicken to eat.
The feed tower provides an automatic feeding equipment, powerful equipment, can reasonably match the feed, feed tower a water storage function, feed into the storage tower, the tower will reasonably mix the water and feed, and then sent to the chicken coop by the feeder. This reduces the use of manpower to some extent! It's a lot easier for us to breed!
Matters needing attention for the material tower
(1) High temperature
In summer, in the case of direct exposure to the sun, the air inside the car is 20 degrees warmer than the outside of the car, which has good airtightness and slow air mobility. The temperature in the car is generally between 50 and 60 degrees. So in summer, the conservative estimate in the tower is about 50 degrees.
However, when the feed storage temperature is lower than 10℃, the mold growth is slow, and when it is higher than 30℃, the mold growth is rapid, which leads to the rapid deterioration of the feed quality. The unsaturated fatty acids are also easy to oxidize and deteriorate under the condition of high temperature and humidity. Therefore, the summer feed tower is the weight of improper feed storage.
(2) Mold
At present, most of the feed towers lack cleaning projects. Years of waste materials and feed surface are easy to breed mold under the condition of high temperature and humidity, which causes great harm to pig production invisible.
(3) powder content rate
In the process of using the feed tower, too much feed powder will be produced invisibly.
Because the use of feed tower needs a specific feed transport vehicle, in the process of transmission to the feed tray, need to go through up to 4-5 times of dragon transport, will cause the amount of powder tank increase, in high temperature and high humidity environment, easy to mold.
Welcome to Discuss these Issues with us!
Line
Zalo
